Packing Information

Pcs/Carton: N/A

Packing Size/Carton:N/A

Packing Vol/Carton: N/A

N.W./Carton: N/A

G.W./Carton: N/A

QTY in 40HQ: N/A

QTY in 40GP: N/A

QTY in 20GP: N/A

TPV 2180 is made in using the dynamic vulcanization high-tech high-performance EPDM/PP thermoplastic elastomer.It has good environmental resistance,low compression deformation performance;It can use the way such as extrusion,injection molding,blow molding processing molding,do not need to conventional vulcanization process of rubber processing;It is easy dyeing,make product design more flexible;It can be recycling reuse,more in line with environment protection requirements.

 

The typical performance in the following table:

 

Physical Properties	Test Standard		Typical Value	Unit
Hardness	GB/T531	ISO 7619	85	Shore A
Density	GB/T533	ISO 2781	0.99	g/cm3
Tensile Strength	GB/T528	ISO 37	7.5	MPa
Elongation at Break	GB/T528	ISO 37	450	%
Tear Strength	GB/T529	ISO 34	36	kN/m
Melting Index	GB/T3682	ISO 1133	7	g/10min

Attention:Did not indicate the test temperature above is 23℃

 

The typical molding process in the following table:

 

Injection Molding Conditions			Extrusion Molding Conditions
Temperature Setting	Front end Mesomere Posterior Jet	180-215℃ 180-215℃ 180-215℃ 187-220℃	Temperature Setting	Front end Fillter Section Measuring Section Posterior	180-200℃ 180-205℃ 187-210℃ 187-210℃
Shrinking Percentage	1.6%~2.1%		Expansion Rate	0%-15%

Attention:Molding material should be dry(80℃×2Hour)